1、 Machine Introduction:

SDSK- The 2012G model is a large aluminum high-speed precision carving machine specially designed for customers; Equipped with a 10 position straight row tool magazine; The movement mode is to move the Y-axis workbench forward and backward, the X-axis to move left and right, and the Z-axis to move up and down. The body adopts top-notch Jinan granite (marble) structure, which never deforms; The three-axis adopts imported Rexroth/Yintai precision linear guide rail, linear motor, distribution cabinet thermostatic system, advanced spindle refrigeration system, automatic lubrication system, coolant spray system, air filter device, which ensures higher processing accuracy, speed and stability; Especially suitable for precision highlight, engraving and milling, and tapping processing of various copper, aluminum, acrylic, plastic and other parts< Br/>
Additionally, a fourth rotary shaft, side milling head, and probe function can be added. If higher requirements are needed for high gloss, an additional 100000 rpm spindle, frequency converter, and jacket can be equipped, and the 30000 rpm spindle can be exchanged< Br/>
&Nbsp< Br/>
&Nbsp< Br/>
 < Br/>
&Nbsp< Br/>
(Can be fully covered)

&Nbsp< Br/>
&Nbsp< Br/>
&Nbsp< Br/>
&Nbsp< Br/>
&Nbsp< Br/>
2、 List of Main Machine Configuration (Unit: mm)

Number
Regulations; Grid; Speak; bright
quantity
1. 
Outer cover: 2mm steel plate, baked paint (stainless steel water tank)
1 set
2. 
Aluminum workbench dimensions: 2000 in X direction, 1200 in Y direction, thickness 50
1 set
3. 
Marble body, marble crossbeam
1 set
4. 
Cast iron mechanical parts
1 batch
5. 
Three axis linear motor: X (maximum driving force 4560, continuous driving force 912) Y (maximum driving force 7452, continuous driving force 1490) Z (maximum driving force 4560, continuous driving force 912)
1 set each
6. 
XYZ high-tech servo driver
1 set each
7. 
XYZ imported Guangshan ruler 0.002
1 set each
8. 
Use  for XYZ axis; Imported Rexroth/Intime Precision Linear Guideway
1 set each
9. 
Huashu Drilling Center System HNC-818AM (102ipc) - Fully Closed Loop
1 set
10. 
Z-axis SMC balance cylinder
2 sets
11. 
Distribution cabinet constant temperature system
1 set
12. 
Variable frequency drive;
1 set
13. 
Deep carving electric spindle (models BT30/7.5-125); 30000rpm, 11KW, with encoder, using BT30 blade handle, outer diameter 125mm, with encoder
1 unit
14. 
Straight 10 position tool magazine (steel claw)
1 set
15. 
Imported NSK; P-grade angular contact paired bearings
5 sets
16. 
Spindle water cooler
1 unit
17. 
Electronic handwheel
1 set
18. 
Knife alignment instrument
1 unit
19. 
X/Z-axis equipped with three proof cloth organ cover, Y-axis steel plate cover
1 set each
20. 
X/Y/Z axis plastic drag chain
1 set each
21. 
Automatic lubrication oil pump 2 liters
1 set
22. 
air filter
2 sets
23. 
Water spraying and water air mixing spray device
1 set each
24. 
water pump
1 set
25. 
Machine tool accessories
1 set
26;
BT30 knife handle
Two
27. 
Y-axis automatic slag discharge
2 sets
&Nbsp< Br/>
&Nbsp< Br/>
&Nbsp< Br/>
&Nbsp< Br/>
&Nbsp< Br/>
3、 Main technical parameters of the equipment: (unit: mm)

model
SDSK-2012G
External dimensions
Length 3100 * Width 3500 * Height 3000
X/Y/Z stroke
2050 * 1230 * 350
Maximum air travel speed
100000mm/min
Maximum processing speed
12000mm/min
control system
Huashu Drilling Center CNC System - Full Closed Loop
Sports system
Linear motor+high-tech drive
System resolution
zero point zero zero one
Three axis verticality
0.015mm
Whole machine positioning accuracy
0.01mm
Localization accuracy
Within 300mm, it is 0.005mm
Repetitive positioning accuracy
0.002mm
Number of spindles
one
Spindle power
11KW/piece
Knife changing method
automatic
Spindle speed
30000rpm/min
Clamping tool handle
BT30 (maximum 12)
Knife alignment method
automatic
Loading height
300mm
The countertop bears a load
500Kg
Rated voltage
380V/50HZ
Maximum power of the entire machine
19KW
Overall weight
8000Kg
&Nbsp< Br/>